CAREERS - Be part of a growing company!

 

As an employee of Storm Power Components, not only will you be part of a growing company with all standard benefits such as paid vacation time, 401k, health, dental, vision and life insurance, you will be part of a team that not only celebrates company achievements but individual ones as well.

Check out this video and listen to what our team members have to say about working at Storm Power Components:

APPLY ONLINE TODAY!

Available positions require all or most of the following as part of the job description. Other requirements are listed separately. Experience not necessary, but helpful.

  • Understand and use a computer.
  • Understand and use the Barcam scanning system, scan for job time and/or material scrap.
  • Understand the basics of reading dimensional drawings (prints).
  • Communicate with material clerks, process engineers, QC inspectors, maintenance, supervisors, and shipping clerks.
  • Fill out work orders, tracking logs, and/or quality documentation.
  • Keep machine and area clean using the 5S technique.
  • Move to other areas to help when requested.

Positions Available: All shifts are a 3 day work week

"A" Shift  -  5:30a - 5:30p  M-W

Laminated Parts - 2 openings.

  • Define the general work guidelines on the assembly of laminated bus components.
  • Be able to review and understand work orders and specific instructions defined in the narrative of Lamination operations.
  • Review all components in the assembly to make sure they have been completed appropriately/.
  • Be able to assemble all completed components into the fixture per the work order and prints.
  • Hi-Pot Testing per work order.

"B" Shift  -  5:30p - 5:30a  M-W

Brake Operator - 2 openings.

  • Responsible for the bending and shaping of parts that require forming.
  • Understand and use all forming presses.
  • Be able to retrieve and install tooling, some of which may require heavy lifting.
  • Understand and use measuring equipment, including calipers and tape measures, height gauges, and protractors.
  • Identify, organize, and route jobs that have been formed.

Haas Operator (CNC) - 3 openings.

  • Responsible for fabrication of raw materials.
  • Basic understanding of the Haas Milling Center.
  • Understand tooling requirements.
  • Understand clamps and fixtures, their retrieval and installation.
  • Understand and use measuring equipment, including calipers, micrometers, angle gages, tape measures and surface smoothness testers.
  • Identify, organize, and route jobs that have been fabricated.

Punch Operator - 1 opening.

  • Understand and use the BBM punch press.
  • Be able to organize and build the punch tooling for the BBM.
  • Understand and use measuring equipment, including calipers and tape measures.
  • Good math skills are a plus.
  • Identify, organize, and route jobs that have been punched.

Plating - 1 opening.

  • Be able to understand and use all equipment used in applying plating to parts.
  • Have basic mathematical skills in order to calculate plating amperages.
  • Be able to read and understand customer supplied plating specifications and ASTM plating specifications.
  • Locate, identify, and understand MSDS.
  • Be aware of the hazards of lead (lead plating).
  • Remove plating bath chemicals and clean tanks as required.

 


"C" Shift  -  5:30a - 5:30p  TH-SA

Brake Operator - 2 openings.

  • Responsible for the bending and shaping of parts that require forming.
  • Understand and use all forming presses.
  • Be able to retrieve and install tooling, some of which may require heavy lifting.
  • Understand and use measuring equipment, including calipers and tape measures, height gages, and protractors.
  • Identify, organize, and route jobs that have been formed.

Haas Operator(CNC) - 1 opening.

  • Responsible for fabrication of raw materials.
  • Basic understanding of the Haas Milling Center.
  • Understand tooling requirements.
  • Understand clamps and fixtures, their retrieval and installation.
  • Understand and use measuring equipment, including calipers, micrometers, angle gages, tape measures and surface smoothness testers.
  • Identify, organize, and route jobs that have been fabricated.

Plating - 1 opening.

  • Be able to understand and use all equipment used in applying plating to parts.
  • Have basic mathematical skills in order to calculate plating amperages.
  • Be able to read and understand customer supplied plating specifications and ASTM plating specifications.
  • Locate, identify, and understand MSDS.
  • Be aware of the hazards of lead (lead plating).
  • Remove plating bath chemicals and clean tanks as required.

Material Handler - 1 opening

  • Unload/Load trucks using forklift (Valid license required. We will train).
  • Maintain raw materials warehouse, including correct placement of incoming goods. (Forklift/Combi).
  • Facilitate transfer of materials from warehouse to production floor (Forklift).
  • Maintain all metal scrap for disposition.
  • Perform cycle counts.

Lathe Operator - 1 opening

  • Basic understanding of computers and machinist techniques.
  • Basic understanding of the Haas Lathe Milling Center.
  • Understand tooling requirements.
  • Understand clamps and fixtures, their retrieval and installation.
  • Understand and use measuring equipment, including calipers, micrometers, angle gauges, tape measures and surface smoothness testers.
  • Firm grasp on reading dimensional drawings (prints).
  • Identify, organize, and route jobs that have been finished.

BBM Operator (punch machine) - 2 openings

  • Understand and use the BBM punch press.
  • Be able to organize and build the punch tooling for the BBM.
  • Understand and use measuring equipment, including calipers and tape measures.
  • Identify, organize, and route jobs that have been punched.

Masking - 1 opening

  • Responsible for masking parts to be powder coated or plated.
  • Understand the masking procedure.
  • Understand and use measuring equipment, including calipers, tape measures and height gauge.
  • Identify the masking dimensions.
  • Using calipers or height gauge mark part per print.
  • Use foil or masking tape to cover area not to be painted or plated. Make sure edges are sealed where paint or plating will not seep on sealed part.

Quality Inspector - 1 opening

  • Understand and use all measurement and monitoring equipment.
  • Use basic mathematical skills, including knowledge of fractions and decimals, to measure part dimensions.
  • Have a firm understanding of reading and interpreting dimensional drawings (prints).
  • Identify, organize, and route jobs that have been inspected.
  • Ability to prioritize job requirements based on production needs.
  • Communicate with process engineers, operators, production supervisors, and quality supervisors concerning quality related production issues.
  • Be able to make minor decisions on day to day, hour to hour basis concerning quality issue, understand when major decisions need to be handled by a higher quality control authority, and know the difference between the two.

Powder Coat - 1 opening

  • Understand and use all equipment used in applying powder coat to parts.
  • Understand and use the Barcam scanning system, including scanning for job time and scrapping of material.
  • Identify, organize, and route jobs that have been powder coated.
  • Understand the basics of reading dimensional drawings (prints) along with customer supplied powder specifications.
  • Understand how to and be aware of the risks of dielectric (Hipot) testing.
  • Have knowledge and be able to use testing equipment for powder thickness.
  • Locate, identify, and understand MSDS.
  • Be aware of the hazards of painting.
  • Take inventory of paint/painting materials.

Deburr - 1 opening

  • Responsible for removal of sharp edges from a part.
  • Understand and use the belt sanders, Almco or Timesaver (known as the Ramco) machines.
  • Identify, organize, and route jobs that have been deburred.

Laminated Parts - 1 opening

  • Define the general work guidelines on the assembly of laminated bus components.
  • Be able to review and understand work orders and specific instructions defined in the narrative of Lamination operations.
  • Review all components in the assembly to make sure they have been completed appropriately/.
  • Be able to assemble all completed components into the fixture per the work order and prints.
  • Hi-Pot testing per work order.

 


"D" Shift - 5:30p -5:30a  TH-SA

Quality Inspector - 1 opening

  • Understand and use all measurement and monitoring equipment.
  • Use basic mathematical skills, including knowledge of fractions and decimals, to measure part dimensions.
  • Have a firm understanding of reading and interpreting dimensional drawings (prints).
  • Identify, organize, and route jobs that have been inspected.
  • Ability to prioritize job requirements based on production needs.
  • Communicate with process engineers, operators, production supervisors, and quality supervisors concerning quality related production issues.
  • Be able to make minor decisions on day to day, hour to hour basis concerning quality issue, understand when major decisions need to be handled by a higher quality control authority, and know the difference between the two.

 

storm power employees

Follow Us!